CMI STD-400 Counterflow Drum Plant

Description

• CMI STD-400 Counterflow Drum Plant
• Model year 1999
• Low tonnage plant average yearly 30,000tons.

 

• CMI STD400 Drum –
• 8’ main drum diameter
• Right hand discharge, saddle chain drive 150hp, slinger inlet
• Starjet580 longnose burner combo fuel setup for both. Currently running on nat gas. Both fuel gas trains included
• Thickness readings on exterior average ½’’ or .500.
• Triple drum shell interior rebuilt approx. 7 years ago with new stainless steel inner tube

 

• Replacement Maxam Drum shell included. (Not installed)
• 8ft x 47ft. Straight bore Counterflow Drum Shell
• 500,000 tons ran thru shell
• Average overall thickness of this drum is 3/8’’ or .350
• Thicknesses below starting at Inlet
• .366.341.366.351.356.356.356.361.380.366.370.366.370
• Includes shipping saddles
• New Maxam Raptor RAP collar included. (Not installed)

 

• CMI RA3 Model Reverse Air Baghouse –
• Capable of up to 73,000cfm
• Nominal 60’’ exhaust fan w. twin 125hp motors
• Stack mount electric damper
• Center auger discharge to 12’’ x 40’ auger
• Inertial separator inlet
• No method of dust metering for return
• Bags approx. 4 years old with little tonnage on them
• Three boxes of new bags and some spare cages included
• All interconnecting ductwork included with support structure for duct

 

• CMI Coldfeed System SAB532 –
• 5 bin coldfeed 10’ x 14’ bin openings 32 ton capacity each
• All bins are mounted individually
• 30’’ feeders 5hp AC drive
• 30’’ collecting conveyor

 

• 30’’ x 40’ channel frame conveyor feeding screen
• Smico 4’ x 10’ DD screen with deck selector. No cloth on lower deck
• 30’’ x 40’ int channel frame conveyor feeding pugmill
• Pugmill Systems 500BT twin shaft pugmill. Twin motor drive system nominal 40hp each
• 30’’ x 60’ channel frame scale conveyor with gravity takeup and wind guards

 

• CMI Lime Silo MFS700-STA –
• 700bbl capacity equipped with weighpod and bin vent baghouse
• Pod to auger discharge – Auger 12’’ diameter x 37’ long

 

• CMI Energy center SEC2U –
• Allen Bradley 1200amp switchgear
• Unit mounted on support structure
• Plug in cabling to unit and cablers in cable tray throughout plant
• Soft start on fan, drum and drag slat
• VFD’s on bins
• CMI single level control house
• 12’ x 15’ 360-degree viewing
• New air conditioning unit
• Impulse 2 controls with complete electrical schematics and parts manuals

 

• CMI RAP Bin –
• 10’ x 14’ bin opening w/ 24’’ feeder
• Bin equipped with grizzly
• Bin feed int mediate conveyor to screen 24’’ x 25’

 

• Smico single deck 4’ x 8’ single deck screen
• CMI RAP scale conveyor 30’’ x 70’ w/ gravity takeup and wind guards

 

• CMI EMS 210 Silo System –
• Dual discharge gates
• Oil heat on cone
• 48’ deck height
• 13’ drive height
• Bolt on legs
• Enclosed bintop batcher
• CMI main drag slat 36’’ x nominal 75’ dual chain chrome floor 100hp drive
• Oil heat on floor and equipped with reject gate
• CMI flat transfer conveyor 30’’ x 15’ with flop gate 20hp drive TXT6
• CMI pitsaver low pro truck scale 10’ x 70’. Tag intact. 3 section scale

 

• CMI Vertical AC Tanks OCT30VA
• 2 – 30,000 Gallon vertical AC tanks
• Coiled for oil heat
• Equipped with pressure transmitters and agitators in both tanks

 

• CEI hot oil heater
• 1.5mbtu
• Running on natural gas
• Powerflame combo burner

 

• CMI micromotion AC pump metering skid –
• Spare coreolis meter included never used

 

• Vertical 20,000 gallon Waste oil tank
• UL Listed
• Pump package included
• Heavy oil preheater included

 

• Additional dust additive silo –
• Unit is not currently installed to run on this pant
• Nominal 500bbl Capacity
• Unknown manufacturer
• Equipped with weighpod and bin vent baghouse
• Discharge thru airlock to blower
• Gardner Denver 30hp Blower

Additional information

Region	East
TPH	400-500